Egg white

What you will need

• Blunt kitchen knife
• Liquid hand dishwashing Detergent
• Ammonia
• Enzyme product
• Chlorine bleach or oxygen bleach

Steps to Clean

1. Scrape off excess material.
2. Soak for 15 minutes in mixture of 1 quart lukewarm water, one-half teaspoon liquid hand dishwashing detergent and one tablespoon ammonia.
3. Rub gently from back to loosen stain.
4. Soak another 15 minutes in above mixture. Rinse.
5. Soak protein stain in enzyme product for at least 30 minutes. Soak aged stains for several hours. Launder.
6. If color stain remains, launder, using chlorine bleach if safe for fabric, or with oxygen bleach.

What you will need

• Ammonia
• Detergent
• 3% Hydrogenperoxide

Steps to Clean

1. Remove as much of the stain as possible by blotting with a white paper towel or scraping with a dull knife, then neutralize with an ammonia solution (1 tablespoon of clear household ammonia to 1/2 cup of water.). Saturate spot with the ammonia solution using a spray bottle. Do not wet backing. Blot with a white paper towel to remove excess moisture.
2. Apply a small quantity of detergent solution to the spot. (To make the detergent solution mix 1/4 teaspoon of a hand dishwashing detergent which does not contain lanolin or bleach with 1 quart of water) Use a blotting motion to work the detergent into the affected area. If spot is being removed continue applying detergent and blotting with a white paper towel until spot is removed.
3. Rinse with tap water using a spray bottle, blot to remove excess moisture.
4. Spray lightly with water, do not blot this time; apply pad of paper towels and brick and allow to dry.
5. If there is still some stain on the carpet and blotting is not removing it, then moisten the tufts in the stained area with 3% hydrogen peroxide. Let stand for on (1) hour. Blot and repeat until carpet is stain free. Light will cause peroxide to change back to water so no rinsing is necessary. Apply pad of paper towels and weight down with brick.

Or

What you will need

• Dull knife
• Diluted carpet shampoo
• Vacuum cleaner

Steps to Clean

1. Remove excess material by blotting up liquids with a clean absorbent towel and scraping up solids with the dull edge of a knife.
2. Sponge lightly with cool water and blot several times.
3. Apply diluted carpet shampoo (1 part liquid carpet shampoo to 4 parts water) with a brush or towel. 
4. Let the area dry thoroughly, and then vacuum.
5. Repeat if needed.

What you will need

• Detergent

Steps to Clean

1. Mix one (1) tablespoon of liquid dishwashing detergent with two (2) cups of cool water.
2. Using a clean white cloth, sponge the stain with the detergent solution.
3. Blot until the liquid is absorbed.
4. Repeat Steps 2 and 3 until the stain disappears.
5. Sponge with cold water and blot dry to remove the detergent solution.